RIDGID NaviTrack 10 Návod k obsluze Strana 17
- Strana / 24
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
SeekTech
ST-510 Line Transmitter
Other Manufacturers Menu
This menu allows you to use the ST-510 to transmit
on different manufacturer’s frequencies. This is
convenient if you are using a locator/receiver other
than a SeekTech (the default setting). Simply choose
the manufacturer of the intended receiver and
frequencies for that system will be loaded and
available. See the Manufacturer’s Frequencies table
on page
20.
)
)
)
Figure 27: Manufacturers Menu Selection
This selection brings up the list of manufacturers.
)
)
)
Figure 28: List of Manufacturers (First Screen)
When using a receiver frequency set other than
SeekTech’s, select the frequency according to the
relative position of the other manufacturer’s
frequency on their frequency list (see table on page
20). For example, the low frequency key would
corre
spond to their lowest frequency; the highest
frequency key to their highest. If the manufacturer
has more than 4 frequencies, the highest frequency
key will switch to the next highest frequency. The
selection will move up one frequency for each press;
after the highest available frequency is reached the
selection will cycle to the lowest frequency in that set.
Low
Med Low
Med High
High
Figure 29: Frequency Buttons
Adjusting the LCD Screen Contrast
LCD contrast is set at the factory and should not
normally require adjustment. Optimal contrast is set
when the background remains white, while the black
pixels are set to be as dark as possible.
Note: The LCD can be adjusted to completely white
or completely black, which will affect readability.
LCD contrast may change with extremes in
temperature. When the screen is exposed to high
heat from direct sunlight it may darken. It is
recommended that the screen be shaded if it is to
be exposed to excessive sunlight. Use the shoulder
strap to cover the screen if needed.
If the display appears too dark or too light when it is
on, it is likely that the LCD contrast has become
misadjusted. First try powering the unit OFF and then
back ON. If the problem persists adjust the LCD
contrast darker or lighter as needed.
To adjust the LCD Contrast:
1. Press and hold down the select key:
2. Simultaneously press the up arrow key to
lighten the display or press the down arrow
key to darken the display.
- SeekTech 1
- ST-510 1
- ST-510 Line Transmitter 3
- General Safety Information 4
- DANGER 6
- Transmitter Components 7
- Getting Started 9
- Using the ST-510 Line 10
- Transmitter 10
- Direct Connect Method 11
- 6. Check the Receiver 13
- Inductive Clamp Method 14
- Inductive Mode 14
- Features 15
- Other Manufacturers Menu 17
- Useful Information 18
- FCC Limits 19
- Transportation and Storage 19
- Maintenance and Cleaning 19
- Specifications 20
- Trouble Shooting Guide 21
- Standard Replacement Parts 21
- Frequencies 22
LG VC1061N Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Für Zuhause LG VC1061N.
Wir stellen 1 PDF-Handbücher LG VC1061N zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentáře k této Příručce